-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
4-ch Isolated (Wet, 4~30 VDC) DI and 4-ch Signal Relay Module
Module RS-485 DCON 4 kênh đầu vào số DI+4 kênh đầu ra Relay ICP DAS I-7060-G CR
Features
• 2 Form A and 2 Form C Signal Relay Output
• ±2 kV EFT protection for Power Line
• Sink- and Source-type for Digital Input
• Digital Input Channels can be used as 16-bit Counters
• Configurable Power-on Value Settings
• Configurable Safe Value Settings
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C
Introduction
The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output channels, while the M-7060P provides 4 digital input channels, 2 Form A and 2 Form C power relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. The “D” versions of the 7060 series provide eight LED indicators that can be used to monitor the status of the digital input and relay output. The “M” versions of the 7060 series support both the Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The 7060 series is the ideal solution for small signal switching applications, while the M-7060P is the perfect solution for high power applications.
Specification
CPU Module | |
---|---|
Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
Isolation | |
---|---|
Intra-module Isolation | 3750 VDC |
EMS Protection | |
---|---|
EFT (IEC 61000-4-4) | ±2 kV for Power Line |
ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal ±8 kV Air for Random Point |
LED Indicators | |
---|---|
Status | 1 x Power and Communication |
Digital Input/Counter | |
---|---|
Channels | 4 |
Type | Wet Contact |
Sink/Source (NPN/PNP) | Sink/Source |
Wet Contact, ON Voltage Level | +1 VDC Max. |
Wet Contact, OFF Voltage Level | +4 ~ 30 VDC |
Max. Counts | 65535 (16-bit) |
Frequency | 100 Hz |
Min. Pulse Width | 5 ms |
Input Impedance | 3 kΩ |
Overvoltage Protection | ±35 VDC |
Relay Output | |
---|---|
Channels | 4 (2 x Form, 2 x Form C) |
Type | Signal Relay |
Contact Material | Gold-plated silver |
Contact Rating | Form A: 0.6 A @ 125 VAC 2 A @ 30 VDC Form C: 0.6 A @ 125 VAC 2 A @ 30 VDC |
Operate Time | 3 ms |
Release Time | 2 ms |
Electrical Endurance | 5 x 10^5 ops. |
Mechanical Endurance | 1 x 10^8 ops. |
Surge Strength | 1500 VDC |
Power on Value | Yes |
Safe Value | Yes |
COM Ports | |
---|---|
Ports | 1 x RS-485 |
Baud Rate | 1200 ~ 115200 bps |
Data Format | (N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) |
Protocol | DCON |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Input Range | +10 ~ +30 VDC |
Consumption | 1 W |
Mechanical | |
---|---|
Dimensions (mm) | 123 x 72 x 35 (W x L x H) |
Installation | DIN-Rail |
Environmental | |
---|---|
Operating Temperature | -25 ~ +75 °C |
Storage Temperature | -40 ~ +85 °C |
Humidity | 10 ~ 95% RH, Non-condensing |
Download
Ordering information
I-7060-G CR | 4-ch Isolated DI (Wet, 4~30 VDC) and 4-ch Signal Relay Module using DCON Protocol (Gray Cover) (RoHS) |
Số lượng:
Tổng tiền: