Module RS-485 DCON 5 kênh đầu ra Relay + 4 kênh đầu vào số DI ICP DAS I-7065D-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

4-ch Isolated (Wet, 4~30 VDC) DI and 5-ch Power Relay Module with LED Display

Gọi +84 904251826 để được trợ giúp

Module RS-485 DCON 5 kênh đầu ra Relay + 4 kênh đầu vào số DI ICP DAS I-7065D-G CR

Features

• 4 Digital Input channels and 5 Relay Output channels
• Form A Power Relay Output
• Sink- and Source-type for Digital Input
• Digital Input Channels can be used as 16-bit Counters
• Configurable Power-on Value Settings
• Configurable Safe Value Settings
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Introduction

The I-7063 module provides 8 digital input channels and 3 Form A relay output channels, and the 7065 series provides 4 digital input channels and 5 Form A relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. The I-7063D provides 11 LED indicators and the I-7065D/M-7065D provides 9 LED indicators that can be used to monitor the status of the digital input and relay output. The M-7065 supports both the Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments.

Specification

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)

 

Display
Type I/O LED Indicator

 

Isolation
Intra-module Isolation 3750 VDC

 

EMS Protection
EFT (IEC 61000-4-4) ±2 kV for Power Line
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Point

 

LED Indicators
Status 1 x Power and Communication
9 x Digital Input/Relay Output

 

Digital Input/Counter
Channels 4
Type Wet Contact
Sink/Source (NPN/PNP) Sink/Source
Wet Contact, ON Voltage Level +1 VDC Max.
Wet Contact, OFF Voltage Level +4 ~ 30 VDC
Max. Counts 65535 (16-bit)
Frequency 100 Hz
Min. Pulse Width 5 ms
Input Impedance 3 kΩ
Overvoltage Protection ±35 VDC

 

Relay Output
Channels 5 (Form A)
Type Power Relay
Contact Material Gold-plated Silver Cadmium Alloy
Contact Rating Form A:
5 A @ 250 VAC
5 A @ 30 VDC
Operate Time 6 ms
Release Time 3 ms
Electrical Endurance 1 x 10^5 ops.
Mechanical Endurance 2 x 10^7 ops.
Surge Strength 4000 VDC
Power on Value Yes
Safe Value Yes

 

COM Ports
Ports 1 x RS-485
Baud Rate 1200 ~ 115200 bps
Data Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Protocol DCON

 

Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.8 W

 

Mechanical
Dimensions (mm) 123 x 72 x 35 (W x L x H)
Installation DIN-Rail

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-7065D-G CR  4-ch Isolated DI (Wet, 4~30 VDC) and 5-ch Power Relay Module with LED Display using DCON Protocol (Gray Cover) (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: