-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
Two-channel CAN Bus Isolated Bridge
Bộ cách ly CAN Bus ICP DAS I-7532-G CR
Feature
Introduction
I-7532 is a CAN bridge that can be used to integrate two CAN networks with the different CAN baud rate. When some errors (e.g. bit error) happened on one CAN port of I-7532, the other CAN port of I-7532 will not be affected. By using I-7532, users can achieve the following application easily and suitable for any CAN protocol like CANopen, DeviceNet, J1939 etc.
(1) Extend CAN bus network distance.
(2) Connect two CAN bus networks with different baud rate.
(3) Raise the number of node in CAN bus network.
(4) Integrate multi the same CAN devices in the CAN network.
Application
• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition
Specifications
CAN | |
---|---|
Ports | 2 |
Baud Rate | 5 k ~ 1 M bps |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminal Resistor | Jumper for 120 Ω terminal resistor |
Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
Filter | Yes |
Time Delay | [ 1Mbps (8-byte Data) ] ID-29bit => 156 us ; ID-11bit => 134 us [ 5Kbps (8-byte Data) ] ID-29bit => 30 ms ; ID-11bit => 25 ms |
Power | |
---|---|
Input Range | +10 VDC ~ +30 VDC |
Consumption | 2 W |
Mechanical | |
---|---|
Casing | Plastic |
Dimensions (mm) | 72 x 122 x 33 (W x L x H) |
Installation | DIN-Rail |
Environment | |
---|---|
Operating Temperature | -25 ~ +75 °C |
Storage Temperature | -30 ~ +80 °C |
Humidity | 10 ~ 90% RH, Non-condensing |
Download
Ordering Information
I-7532-G CR | Two-channel CAN Bus Isolated Bridge (RoHS) |
Số lượng:
Tổng tiền: