Bộ chuyển đổi USB sang DeviceNet Master ICP DAS I-7565-DNM-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

USB/DeviceNet Master Converter

THÔNG TIN SẢN PHẨM

Tính năng

Programmable Master MAC ID
Programmable transfer-rate 125 kbps, 250 kbps, 500 kbps
Each port support maximum nodes up to 64
Support UCMM and Group 2 Only Server functions
The maximum Fragment number is (Input/Output) up to 64
Support I/O Operation Mode: Poll, Bit-Strobe and Change Of State/Cyclic
Support Auto-Scan slave device function
Support on-line adding and removing devices
Support boot-up auto communicating with slave devices
Support Auto-Reconnect when the connection is broken

Giới thiệu

I-7565-DNM can represent an economic solution of DeviceNet application and be a DeviceNet master device on the DeviceNet network. It is a "Predefined Master-Slave connection Set". I-7565-DNM supports Group 2 only Server and UCMM functions to communication with slave devices. It has an independent CAN bus communication port and has the ability to cover a wide range of DeviceNet applications. Besides, I-7565-DNM uses the CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function.It can be installed on almost any windows-based system, for example WinXP/Win7/Win10. It is popularly applied in the industrial automation, building automation, vehicle, marine, and embedded control network. In order to expand the DeviceNet functions of ICPDAS products, I-7565-DNM is developed for this purpose.

Thông số kỹ thuật

Software
Driver	Win XP/ Win7/ Win8/ Win10 32-bit and 64-bit , Linux driver
SDK	x64 DLL, .NET DLL, VB6 bas, VC6 DLL, BCB6 DLL

CPU Module
CPU	x86

LED Indicators
Status	PWR LED, RUN LED, NS LED, MS LED

USB
Specification	USB 1.1 and USB 2.0
Transfer Speed	921.6 kbps
Connector	USB Type B

DeviceNet
Controller	NXP SJA1000T with 16 MHz clock
Ports	1
Baud Rate	125 k, 250 k, 500 k
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor	Jumper for 120 Ω terminal resistor
Protocol	DeviceNet Volumn I ver2.0, Volumn II ver2.0
CAN Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B

Power
Consumption	3 W

Mechanical
Dimensions (mm)	72 x 101 x 33 (W x L x H)
Installation	DIN-Rail

Environment
Operating Temperature	-25 ~ +75 ℃
Storage Temperature	-30 ~ +80 ℃
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Thông tin mua hàng

I-7565-DNM-G CR

USB/DeviceNet Master Converter with D-sub 9-pin connector (RoHS)

Bộ chuyển đổi USB sang DeviceNet Master ICP DAS I-7565-DNM-G CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng