Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đI-87016W-G CR: Module 2 kênh đầu vào Load Cell (Strain Gauge)
Features
• Strain Gauge Measurement
• High Resolution: 16-bit
• Excitation Voltage Output : 0 ~ 10 V
• Individual Channel Configuration
• 2-channel Digital Inputs
• 2-channel Digital Outputs
• 3000 VDC Intra-module Isolation
• RoHS Compliant
• Wide Operating Temperature Range: -25 ~ +75°C
Introduction
Around our surroundings, there are numerous examples of converting force into a measurable electrical output; In most cases, we need a strain gauge or a load cell. But the question is that how do we deal with these electrical outputs? I-87016W is definitely your NO.1 choice! It not only processes the data from load cells or strain gauges, but also features linear mapping that generates intuitive and synchronic results for you; by user-defined corespondent table, I-87016W converts the data into weight directly!
Specification
| CPU Module | |
|---|---|
| Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Isolation | |
|---|---|
| Intra-module Isolation | 3000 VDC |
| EMS Protection | |
|---|---|
| ESD (IEC 61000-4-2) | ± 4 kV Contact for Each Terminal ±8 kV Air for Random Point |
| LED Indicators | |
|---|---|
| Status | 1 x Power and Communication 4 x I/O |
| Analog Input | |
|---|---|
| Channels | 2 |
| Type | Strain Gauge |
| Range | +/-15 mV, +/- 50 mV, +/-100 mV,+/-500 mV, +/-1 VDC, +/-2.5 VDC -20 mA ~ +20 mA (No External Resistor Required) |
| Resolution | 16-bit |
| Accuracy | Voltage: ±0.05% of FSR Current: ±0.1% of FSR |
| Sampling Rate | 10 Hz (Total) |
| Bandwidth | 15.7 Hz (10 Hz mode) |
| Input Impedance | > 400 kΩ (Voltage), 125 Ω (Current) |
| Common Mode Rejection | 150 dB min. |
| Normal Mode Rejection | 100 dB |
| Individual Channel Configuration | Yes |
| Long Distance Measurement | Yes |
| Digital Input/Counter | |
|---|---|
| Channels | 2 |
| Type | Wet Contact |
| Sink/Source (NPN/PNP) | Sink |
| Wet Contact, ON Voltage Level | +3.5 VDC ~ 50 VDC |
| Wet Contact, OFF Voltage Level | +1 VDC Max. |
| Frequency | 50 Hz Max. |
| Min. Pulse Width | 10 ms |
| Input Impedance | 10 KΩ, 0.66 W |
| Channel-to-Channel Isolation | Yes |
| Digital Output | |
|---|---|
| Channels | 2 |
| Type | Open Collector |
| Sink/Source (NPN/PNP) | Sink |
| Load Voltage | +3.5 VDC ~ +50 VDC |
| Max. Load Current | 700 mA/channel |
| Short-Circuit Protection | Yes |
| Power on Value | Yes |
| Safe Value | Yes |
| Excitation Voltage Output | |
|---|---|
| Channels | 1 |
| Range | 0 ~ +10 VDC |
| Resolution | 16-bit |
| Accuracy | +/- 0.05% of FSR |
| Max. Load Current | 80 mA |
| Output Capacity | 10 VDC @ 80 mA |
| Drift | +/- 50 ppm/°C |
| COM Ports | |
|---|---|
| Ports | 1 x RS-485 |
| Baud Rate | 1200 to 115200 bps |
| Data Format | N, 8, 1 |
| Protocol | DCON |
| Power | |
|---|---|
| Consumption | 1.1 W Typical 2.5 W Max. |
| Mechanical | |
|---|---|
| Dimensions (mm) | 30 x 102 x 115 (W x L x H) |
| Environmental | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 95% RH, Non-condensing |
Download
Ordering information
| I-87016W-G CR | 2-ch Isolated Strain Gauge Input Module (RoHS) |
