Chào mừng bạn đến với MC&TT!
Switch công nghiệp
Máy tính công nghiệp
Bộ chuyển đổi tín hiệu

I-87082 CR: Module 2 kênh bộ đếm/tần số (Counter/Frequency)

Chia sẻ
Thương hiệu: ICP DAS Loại: I-8K/I-87K Motion Control
Tình trạng: Còn hàng
Mã sản phẩm: I-87082 CR
Liên hệ
CAM KẾT CỦA CHÚNG TÔI
  • cam kết Cam kết 100% chính hãng
  • cam kết Hoàn tiền 111% nếu hàng giả
  • cam kết Giao hàng nhanh chóng & an toàn
  • cam kết Hàng hóa đầy đủ CO, CQ
  • cam kết Hỗ trợ 24/7
Liên hệ
Để được hỗ trợ. Hãy gọi: 0904251826
vouverKhuyến mãi đặc biệt !!!
  • Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
  • Miễn phí vận chuyển với đơn hàng từ 10.000.000đMiễn phí vận chuyển với đơn hàng từ 10.000.000đ
FREESHIP
FREESHIP Miễn phí vận chuyển
HSD: Không thời hạn
Sao chép

I-87082 CR: Module 2 kênh bộ đếm/tần số (Counter/Frequency)

Features

• 2-channel Counter/Frequency Input
• 32-bit Counter
• Isolated or Non-isolated Input
• Programmable Alarm Output
• Programmable Digital Filter
• Programmable Threshold Voltage Level
• Maximum Frequency of up to 100 kHz
• Dual Watchdog

Introduction

The I-87082 offers 2 high speed counter or frequency input channels and 2 digital output channels. Two types of digital input are provided, one for isolated input, and the other is for nonisolated input. The isolated input provides 3750 Vrms isolation voltage and the non-isolated input provides programmable threshold voltage level. The built-in digital filter is valid for both non-isolated and isolated input and can filter out noise where the high/low pulse width is smaller than the minimum high/low width of the digital filter. The maximum count is up to 32-bit and the maximum frequency is up to 100 kHz. The module also provides programmable alarm output with non-isolated open collectors.

Specification

CPU Module
Watchdog Timer Yes, Module (1.6 Seconds), Communication (Programmable)

 

Isolation
Intra-module Isolation 3750 Vrms

 

LED Indicators
Status 1 x Power and Communication
8 x I/O

 

Digital Output
Channels 2
Sink/Source (NPN/PNP) Sink, Open Collector
Load Voltage +5 VDC ~ +30 VDC
Max. Load Current 30 mA

 

Counter/Frequency/Encoder Input
Channels 2
Type Counter or Frequency
Counter/Encoder Bits 32-bits (4,294,967,295)
ON Voltage Level Sensor Type:
+3.5 VDC ~ +30 VDC

Non-isolated:
0 ~ +5 VDC (Default > 2.4 VDC)
0 ~ +5 VDC (Default < 0.8 VDC)
OFF Voltage Level Sensor Type:
+1 VDC Max.

Non-isolated:
0 ~ +5 VDC (Default > 2.4 VDC)
Max. Counter/Frequency 100 kHz
Frequency Accuracy 1 Hz or 10 Hz (software selectable)
Programmable Alarm Mode Mode 0:
High Alarm Comparator on Counter 0 and Counter 1

Mode 1:
Two Steps High Alarm Comparator on Counter 1
Digital Filter 2 ~ 65000 μs
Counter Mode Up

 

COM Ports
Baud Rate 115200 bps
Data Format N, 8, 1
Protocol DCON

 

Power
Consumption 0.9 W Max.

 

Mechanical
Dimensions (mm) 31 x 116 x 88 (W x L x H)

 

Environmental
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +75 °C
Humidity 5 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-87082     CR  2-ch Counter/Frequency Input Module (Blue Cover) (RoHS)
Danh sách so sánh