Module 4 kênh đầu vào số + 4 kênh đầu ra Relay kết nối RS-485 DCON & Modbus RTU M-7060P
Features
-
I-7060(D)/M-7060(D)
-
M-7060P(D)
-
2 Form A and 2 Form C Power Relay Output
-
±4 kV EFT protection for Power Line
-
±3 kV Surge protection for Power Line
-
Sink- and Source-type for Digital Input
-
Digital Input Channels can be used as 16-bit Counters
-
Configurable Power-on Value Settings
-
Configurable Safe Value Settings
-
Dual Watchdog
-
Wide Operating Temperature Range: -25 ~ +75°C
Introduction
The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output channels, while the M-7060P provides 4 digital input channels, 2 Form A and 2 Form C power relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. The “D” versions of the 7060 series provide eight LED indicators that can be used to monitor the status of the digital input and relay output. The “M” versions of the 7060 series support both the Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The 7060 series is the ideal solution for small signal switching applications, while the M-7060P is the perfect solution for high power applications.
I/O Specification
|
Model |
I-7060 |
M-7060 |
M-7060P |
|
I-7060D |
M-7060D |
M-7060PD |
|
Relay Output |
|
Channels |
4 (Form A × 2, Form C × 2) |
|
Relay Type |
Signal Relay |
Power Relay |
|
Form A Relay |
Contact Rating |
0.6 A @ 125 VAC
2 A @ 30 VDC |
16A @ 250 VAC
10 A @ 30 VDC |
|
Min. Contact Load |
10 uA @ 10 mV |
100 mA @ 6 V |
|
Contact Material |
Gold-plated silver |
Silver Tin Alloy |
|
Operate Time |
3 ms |
10 ms |
|
Release Time |
2 ms |
5 ms |
|
Mechanical Endurance |
1 x 108 ops. |
1 x 107 ops. |
|
Electrical Endurance |
5 × 105 ops. |
1 × 105 ops. |
|
Form C Relay |
Contact Rating |
0.6 A @ 125 VAC
2 A @ 30 VDC |
NO:10 A @ 250 VAC
NC:6 A @ 250 VAC |
|
Min. Contact Load |
10 uA @ 10 mV |
100 mA @ 6V |
|
Contact Material |
Gold-plated silver |
Silver Tin Alloy |
|
Operate Time |
3 ms |
10 ms |
|
Release Time |
2 ms |
5 ms |
|
Mechanical Endurance |
1 x 108 ops. |
1 x 107 ops. |
|
Electrical Endurance |
5 × 105 ops. |
1 × 105 ops. |
|
Surge Strength |
1500 VDC |
2500 VDC |
|
Power-on Value |
Yes |
|
Safe Value |
Yes |
|
Digital Input/Counter |
|
Channels |
4 |
|
Type |
Dry Contact |
- |
|
Wet Contact |
Sink/Source |
|
On Voltage Level |
+1 VDC Max. |
+4 VDC Max. |
|
Off Voltage Level |
+4 ~ 30 VDC |
+10 ~50 VDC |
|
Counters |
Max. Count |
65535 (16-bit) |
|
Max. Input Frequency |
100 Hz |
|
Min. Pulse Widt |
5 ms |
|
Input Impedance |
3 kΩ |
10 kΩ |
|
Overvoltage Protection |
±35 VDC |
±70 VDC |
System Specification
|
Model |
I-7060 |
M-7060 |
M-7060P |
|
I-7060D |
M-7060D |
M-7060PD |
|
Communication |
|
Interface |
RS-485 Modbus RTU, DCON |
|
Format |
(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1) |
|
Baud Rate |
1200 ~ 115200 bps |
|
Protocol |
DCON |
Modbus RTU, DCON |
|
Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
|
LED Indicators/Display |
|
System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
|
I/O LED Indicators |
- |
|
Yes, 8 LEDs as Digital Input/Relay Output Indicators |
|
7-Segment LED Display |
- |
|
Isolation |
|
Intra-Module Isolation, Field-to-Logic |
3750 VDC |
|
EMS Protection |
|
ESD (IEC 61000-4-2) |
±4 kV Contact for each Terminal |
|
±8 kV Air for Random Point |
|
EFT (IEC 61000-4-4) |
±2 kV for Power Line |
±4 kV for Power Line |
|
Surge (IEC 61000-4-5) |
- |
±3 kV for Power Line |
|
Power |
|
Reverse Polarity Protection |
Yes |
|
Input Range |
10 ~ 30 VDC |
|
Consumption |
1 W |
1 W |
1.4 W |
|
1.4 W |
1.4 W |
1.8 W |
|
Mechanical |
|
Dimensions (W x L x H) |
72 mm x 123 mm x 35 mm |
|
Installation |
DIN-Rail or Wall Mounting |
|
Environment |
|
Operating Temperature |
-25 ~ +75°C |
|
Storage Temperature |
-40 ~ +85°C |
|
Humidity |
10 ~ 95% RH, Non-condensing |
Download
Manual
Data sheet
Software
Addressing Map
FAQ
Certification
Odering information
|
I-7060 CR |
4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Blue Cover) (RoHS) |
|
I-7060-G CR |
4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Gray Cover) (RoHS) |
|
I-7060D CR |
I-7060 with LED Display (Blue Cover) (RoHS) |
|
I-7060D-G CR |
I-7060-G with LED Display (Gray Cover) (RoHS) |
|
M-7060-G CR |
4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) |
|
M-7060D-G CR |
M-7060-G with LED Display (Gray Cover) (RoHS) |
|
M-7060P-G CR |
4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS) |
|
M-7060PD-G CR |
M-7060P-G with LED Display (Gray Cover) (RoHS) |
