Distributed Motionnet Four-axis Universal Motion Control Module ICP DAS MN-MP4U-DIN CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Distributed Motionnet Four-axis Universal Motion Control Module

Gọi +84 904251826 để được trợ giúp

Distributed Motionnet Four-axis Universal Motion Control Module ICP DAS MN-MP4U-DIN CR

Features

  • Maximum communication speed: 20 Mbps
  • Pulse Output Rate: 6.6 MHz (Max.)
  • Control up to 64 axes per line
  • Multi-axis linear interpolation function
  • 2-axis circular interpolation function
  • T/S-curve acceleration and deceleration
  • Change speed and position on the fly
  • Slow down sensor, home sensor, positive and negative limit sensors for each axis
  • Software limit and compare trigger output
  • Three-way isolation for power, communication and I/O.(Provide better noise immunity and device protection)
  • Suitable for controlling a variety of servo drivers and stepper drivers

Introduction

The MN-MP4U-DIN is used to expand the number of axes for distributed motion control on a Motionnet fieldbus. These extension slave modules are serially connected to the controller using a simple and affordable Cat.5 LAN cable, and one serial line can support up to 16 four-axis modules. The 26-pin HD D-Sub connector can be used to easily connect with various servo drivers and stepper drivers. ICP DAS also provides a variety of cables suitable for a range of brands of servo drivers, which further reduces the amount of wiring required between the drivers and the controller, making this an ideal solution for highly integrated machine automation applications.

Specifications

LED Indicators
Status Communication state (Link, Error)
Internal 3.3 V Power
Termination Resistor Switch
Mechanic Switch Input
General
Speed Profile Trapezoidal/S-shaped Acc/Dec Driving
Auto-Home Search 13 Types
Axis I/O
Servo Interface Output SVON, ERC, ALM_RST
Latch Input Yes (shared with SD)
Mechanical Switch Input LMT+, LMT-, HOME, SD, EMG
Position Compare Output High-Speed 5 V TTL
or 24 V open collector
Servo Interface Input ALM, RDY, INP
Encoder Input
Mode CW/CCW, A/B phase
Counter Width 28-bit
Pulse Output
Mode OUT/DIR, CW/CCW
Counter Width 28-bit
Rate 6.6 MHz (Max.)
Motionnet
Communication Connectors RJ-45 x2
Transfer Speed 2.5, 5, 10, 20 Mbps
Power
Input Range 24VDC +/-5% (1000 V isolated)
Environment
Operating Temperature 0 ~ +60 °C
Storage Temperature -20 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

MN-MP4U-DIN     CR  Distributed Motionnet Four-axis Universal Motion Control Module with RJ-45 Connector. Includes 4x "CA-PC26M". (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: