Card PCI 4 cổng CAN ICP DAS PISO-CAN400U-T CR
Features
Introduction
The CAN (Controller Area Network) is a serial communication protocol, and efficiently supports distributed real-time control with a very high level of security. It is an especially suit for networking "intelligent" devices as well as sensors and actuators within a system or sub-system. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted. As standalone CAN controller, PISO-CAN400U-T can represents an economic solution of an active CAN board. It has two or four independent CAN bus communication ports with 5-pin screw terminal connector, and has the ability to cover a wide range of CAN applications. Besides, PISO-CAN400U-T uses the new CAN controller Phillips SJA1000T and transceiver 82C250/251, which provide bus arbitration, error detection with auto correction and re-transmission function. It can be installed in a 5V PCI slot and supported truly “Plug & play”.
Specifications
Software | |
---|---|
Driver | Windows XP/7/8/10 (32-bit/64-bit OS), Linux 2.6.x ~ 4.8.0, LabView, DASYLab, InduSoft |
Library | VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net |
PC Bus | |
---|---|
Type | Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, plug and play |
CAN | |
---|---|
Controller | NXP SJA1000T with 16 MHz clock |
Transceiver | NXP 82C250 |
Ports | 4 |
Baud Rate | 10 k ~ 1 M bps |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminal Resistor | Jumper for 120 Ω terminal resistor |
Power | |
---|---|
Consumption | 300 mA @ 5 V |
Mechanical | |
---|---|
Dimensions (mm) | 126 x 85 x 22 (W x L x D) |
Environmental | |
---|---|
Operating Temperature | 0 ~ +60 °C |
Storage Temperature | -20 ~ +70 °C |
Humidity | 5 ~ 85% RH, Non-condensing |
Download
Ordering information
PISO-CAN400U-T CR | 4-port Isolated Protection CAN Universal PCI Card with 5-pin Screw Terminal Connector (RoHS) |