Module RS-485 Modbus RTU 4 kênh AI+2 kênh DI+2 kênh DO ICP DAS tM-AD4P2C2 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

4-channel Isolated AI, 2-channel Isolated DI and 2-channel Isolated DO Module

THÔNG TIN SẢN PHẨM

Tính năng

Multifunction (4 AI, 2 DI and 2 DO)
2 Voltage Input Channels and 2 Current Input Channels
Digital Input Channels can be used as 16-bit Counters
Digital Output Channels can be used as Voltage Input Limit Alarms
Adjustable Sampling Rate
Configurable Power-on Value and Safe Value Settings
Dual Watchdog

Giới thiệu

The tM-AD4P2C2 is a multifunction module that includes 4 analog input channels, 2 digital input channels and 2 digital output channels. The module provides a programmable analog input range that includes 2 voltage input channels (±1 V, ±2.5 V, ±5 V, and ±10 V) and 2 current input channels (±20 mA, 0 ~ 20 mA and 4 ~ 20 mA). The analog inputs provide a high overvoltage protection of 120 VDC and an adjustable sampling rate. The module supports sink-type digital output with short circuit protection and the digital outputs can be used as voltage input limit alarms. The digital inputs are source-type and all digital input channels can be used as 16-bit counters. There are options for configuring power-on and safe digital output values. 4 kV ESD protection and 2500 VDC intra-module isolation are also provided. The tM-AD4P2C2 supports the DCON, Modbus RTU and Modbus ASCII protocols, which can be configured via software.

Ứng dụng

• Industrial Automation
• Industrial Machinery
• Building Automation
• Control Systems
• Food and Beverage Systems
• Semiconductor Fabrication

Thông số kỹ thuật

CPU Module
Watchdog Timer	Yes, Module (2.3 seconds), Communication (Programmable)

Isolation
Intra-module Isolation	2500 VDC

EMS Protection
EFT (IEC 61000-4-4)	±4 kV for Power
ESD (IEC 61000-4-2)	±4 kV Contact for Each Terminal ±8 kV Air for Random Point

LED Indicators
Status	1 x Power and Communication

Analog Input
Channels	Voltage: 2 Single-ended Current: 2 Single-ended
Range	Voltage: ±1 V, ±2.5 V, ±5 V, ±10 V Current: ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
Resolution	Normal Mode: 14-bit Fast Mode: 12-bit
Accuracy	Normal Mode: ±0.1% Fast Mode: ±0.5%
Sampling Rate	Normal Mode: 10 Hz Fast Mode: 200 Hz
Input Impedance	Voltage: 10 MΩ Single-ended Current: 136 Ω
Overvoltage Protection	Voltage: 120 VDC
Overcurrent Protection	Current: Yes, 50 mA @ 110 VDC
Individual Channel Configuration	Yes
Zero Drift	±20 μV/°C
Span Drift	±25 ppm/°C

Digital Input/Counter
Channels	2
Type	Wet Contact, Source
ON Voltage Level	+3.5 ~ +50 VDC
OFF Voltage Level	+1 VDC Max.
Max. Counts	65535 (16-bit)
Frequency	50 Hz
Min. Pulse Width	10 ms
Input Impedance	10 KΩ, 0.5 W
Overvoltage Protection	70 VDC

Digital Output
Channels	2
Type	Isolated Open Collector (Sink)
Load Voltage	+3.5 ~ 50 VDC
Load Current	700 mA/Channel
Overvoltage Protection	60 VDC
Overload Protection	1.4 A (with short circuit protection)
Short-circuit Protection	Yes
Power on Value	Yes, Programmable
Safe Value	Yes, Programmable

Power
Reverse Polarity Protection	Yes
Consumption	1 W Max.
Powered from Terminal Block	Yes, 10 ~ 30 VDC

Mechanical
Dimensions (mm)	52 x 98 x 27 (W x L x H)
Installation	DIN-Rail Mounting

Environment
Operating Temperature	-25 °C ~ +75 °C
Storage Temperature	-30 °C ~ +75 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Thông tin mua hàng

tM-AD4P2C2 CR

4-channel Isolated AI, 2-channel Isolated DI (Wet) and 2-channel Isolated DO (Sink, NPN) Module (RoHS)

Module RS-485 Modbus RTU 4 kênh AI+2 kênh DI+2 kênh DO ICP DAS tM-AD4P2C2 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng