-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
Industrial 3G/4G, Serial IO Data Terminal Unit
Modem IP 4G 1 cổng RS232 + 1 cổng RS485 + 5 cổng I/O Alotcer AD2066
Tính năng
Thông số kỹ thuật
Industrial Design | High-powered industrial cellular module | |
High-powered industrial 32bits CPU | ||
Low power consumption design, support multi-sleep and trigger modes | ||
Housing: iron, providing IP30 protection. | ||
Power range: DC 5~35V | ||
High Reliability | Support hardware and software WDT | |
Support auto recovery mechanism, including online detect, auto redial when offline to make it always online | ||
RS232/RS485/RS422 ports:15KV ESD protection | ||
SIM/UIM port: 15KV ESD protection | ||
Power port: reverse-voltage and over voltage protection | ||
Antenna port: lightning protection(optional) | ||
Standard and Convenience | Adopt terminal block interface, convenient for industrial application | |
Support standard RS232/RS485 ports that can connect to serial devices directly | ||
Two RS232 interfaces can be customized | ||
TTL logic level UART interface can be customized | ||
Support intellectual mode, enter into communication state automatically when powered | ||
Support several work modes | ||
Convenient configuration and maintenance interface | ||
High-performance and Security | Support TCP server | |
Support double data centers, one main and another backup | ||
Support multi data centers and it can support 5 data centers at the same time | ||
Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout | ||
Supply 5 I/O channels, compatible 5 ADC inputs, 3 OC inputs、2 OC outputs (drive capability 20mA) | ||
Support dynamic domain name(DDNS) and IP access to data center | ||
Design with standard TCP/IP protocol stack | ||
Support APN/VPDN | ||
Hardware System | CPU | Industrial 32 bits CPU |
FLASH | 1MB (Extendable to 8MB) | |
SDRAM | 256KB(Extendable to 1MB) | |
Interface | Serial | 1 RS232 port and 1 RS485(or RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5(optional), 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps |
Antenna | Cellular: Standard SMA female interface, 50 ohm GPS(optional):Standard SMA female interface, 50 ohm |
|
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection | |
Power | Terminal block interface, reverse-voltage and over voltage protection | |
Indicator | “PWR”、”RUN”、”Online”、”GPS”(optional) | |
Network | Wireless Network | GSM/GPRS/EDGE: 850/900/1800/1900MHz CDMA: 800/1900MHz WCDMA/HSUPA/HSPA+: 850/900/1900/2100MHz CDMA2000 1x/ EVDO Rev. A: 800/1900MHz TD-SCDMA: 1880-1920/2010-2025MHz(A/F) TDD-LTE: Band 38/39/40/41 FDD-LTE: Band 1/3/5 |
PPP Protocol | Support PPP Protocol | |
PPP Heartbeat | Maintaining links with the cellular network to prevent forced sleep, to ensure the stability of dial-up link. | |
Network Authentication | Support CHAP/PAP Authentication | |
TCP Heartbeat | Monitor the server connection | |
GPS (optional)) |
Receiver Type | 50-channle GPS L1(1575.42MHz)C/A code SBAS: WAAS,EGNOS,MSAS,GAGAN |
Max. update rate | 5 Hz | |
Accuracy | Position: 2.5m CPE SBAS: 2.0m CPE |
|
Acquisition | Cold starts: 32S Warm starts: 32S Aided starts: <1S Hot starts: <3S |
|
Sensitivity | Tracking: -160dBm Reacquisition: -160dBm Cold starts: -146dBm |
|
Timing accuracy | RMS: 30ns 99%: <60ns Granularity: 21ns |
|
Time pulse | Configurable, 0.25 to 1000Hz | |
Power supply | Standard Power | DC 12V/1.5A |
Power range | DC 5~35V | |
Communication Current | <100mA (@12VDC) | |
Standby Current | <20mA(@12VDC) | |
Sleep current | <10mA(@12VDC) | |
Physical | Dimensions | 91x59x23mm |
Weight | 175g | |
Environmental Limits | Operating Temperature | -35~+75ºC (-31~+167℉) |
Storage Temperature | -40~+85ºC (-40~+185℉) | |
Operating Humidity | 95% ( unfreezing) |
Thông tin đặt hàng
Tài liệu
Datasheet
Số lượng:
Tổng tiền: