Module 96 kênh vào/ra số DIO ICP DAS e-D96S CR

Module 96 kênh vào/ra số DIO ICP DAS e-D96S CR

Feature

• 96 channels of Digital I/O 
• Bi-direction programmable I/O ports under software control 
• 3 32-bit bi-direction I/O ports 
• DIO operating voltage: +1.8 V, +2.5 V, +3.3 V, +5 V 
• Pull-high/Pull-low Jumpers for DI channels 
• Digital Pattern Generator for DO channels 
• Pattern-matching and change state Interrupt monitoring 
• Supports a High-density SCSI II 100-pin Connector 

Introduction

The e-D96S is an e-Bus x 1 (similar to PCI-E x1) module that provides 96 Digital I/O lines that consist of three 32-bit bi-directional ports for use in a variety of Digital I/O applications. Each channel could be setting for Digital Input or Output. They provide a variety of operating voltage (+1.8 V, +2.5 V, +3.3 V and +5 V) for customers need. This module needs to be installed on an e-Bus x1 slot of the AXP-9000-IoT Programmable Automation Controller (PAC).

The pull-high/low jumpers on e-D96S module allow the DI status to be predefined instead of remaining floating if the DI channels are disconnected or interrupted. The e-D96S provides a single high-density connector that reduces the amount of installation space required for the module in the PAC.

The module installed on AXP-9000 with 64-bit Windows 10 IoT OS supports DLL SDK and Active X control together with various language sample programs based on Visual C++, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.

Application

Specifications

Download

Datasheet

Documents

Ordering Information