Module RS-485 DCON 1 kênh đầu vào tương tự AI+ 2 kênh DO + 1 kênh DI ICP DAS I-7012 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1-ch AI Module

THÔNG TIN SẢN PHẨM

Features

• Current or Voltage Input
• High Resolution: 16-bit
• High/Low Alarm (Digital Output)
• 50 Hz Event Counter (Digital Input)
• 100 Hz High Sampling Rate
• 3000 VDC Intra-module Isolation
• Dual Watchdog
• Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-7012 is an Analog Input module that is designed for both voltage and current input types. In addition, the module provides 1 Digital Input channel as a 50 Hz event counter and 2 Digital Output channels that can be used as a high/low alarm. The I-7012 also features 3000 VDC intra-module isolation. The I-7012F is an Analog Input module that is designed for both voltage and current input types. The sampling rate for the I-7012F is adjustable and can be switched between fast mode and normal mode depending on your requirements. In addition, the module provides 1 Digital Input channel as a 50 Hz event counter and 2 Digital Output channels that can be used as a high/low alarm. The I-7012F also features 3000 VDC intra-module isolation.

Specification

CPU Module
Watchdog Timer	Yes, Module (1.6 Seconds), Communication (Programmable)

Isolation
Intra-module Isolation	3000 VDC

EMS Protection
ESD (IEC 61000-4-2)	±2 kV Contact for each Terminal

LED Indicators
Status	1 x Power and Communication

Analog Input
Channels	1 Differential
Type	Voltage Current
Range	±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA (requires optional external 125 Ω resistor)
Resolution	16-bit
Accuracy	±0.05%
Sampling Rate	Normal Mode: 10 Hz
Input Impedance	20 MΩ
Common Voltage Protection	±100 VDC
Overvoltage Protection	±120 VDC

Digital Input/Counter
Channels	1
Type	Dry Contact
Sink/Source (NPN/PNP)	Source
Dry Contact, ON Voltage Level	Close to GND
Dry Contact, OFF Voltage Level	Open
Max. Counts	Yes, 50 Hz, 16-bit
Input Impedance	3 kΩ
Overvoltage Protection	±30 VDC

Digital Output
Channels	2
Type	Open Collector
Sink/Source (NPN/PNP)	Sink
Load Voltage	+3.5 ~ +30 VDC
Max. Load Current	30 mA/Channel
Power on Value	Yes
Safe Value	Yes

COM Ports
Ports	1 x RS-485
Baud Rate	1200 ~ 115200 bps
Data Format	N, 8, 1
Protocol	DCON

Power
Reverse Polarity Protection	Yes
Input Range	+10 ~ +30 VDC
Consumption	1.3 W

Mechanical
Dimensions (mm)	123 x 72 x 35 (W x L x H)
Installation	DIN-Rail

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Odering information

I-7012 CR

1-ch AI Module using DCON Protocol (Blue Cover) (RoHS)

Module RS-485 DCON 1 kênh đầu vào tương tự AI+ 2 kênh DO + 1 kênh DI ICP DAS I-7012 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng