Module RS-485 DCON 5 kênh đầu ra Relay + 4 kênh đầu vào số DI ICP DAS I-7065D CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

4-ch Isolated (Wet, 4~30 VDC) DI and 5-ch Power Relay Module with LED Display

THÔNG TIN SẢN PHẨM

Features

• 4 Digital Input channels and 5 Relay Output channels
• Form A Power Relay Output
• Sink- and Source-type for Digital Input
• Digital Input Channels can be used as 16-bit Counters
• Configurable Power-on Value Settings
• Configurable Safe Value Settings
• Dual Watchdog
• Wide Operating Temperature Range: -25 ~ +75°C

Introduction

The I-7063 module provides 8 digital input channels and 3 Form A relay output channels, and the 7065 series provides 4 digital input channels and 5 Form A relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. The I-7063D provides 11 LED indicators and the I-7065D/M-7065D provides 9 LED indicators that can be used to monitor the status of the digital input and relay output. The M-7065 supports both the Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments.

Specification

CPU Module
Watchdog Timer	Yes, Module (1.6 Seconds), Communication (Programmable)

Display
Type	I/O LED Indicator

Isolation
Intra-module Isolation	3750 VDC

EMS Protection
EFT (IEC 61000-4-4)	±2 kV for Power Line
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal ±8 kV Air for Random Point

LED Indicators
Status	1 x Power and Communication 9 x Digital Input/Relay Output

Digital Input/Counter
Channels	4
Type	Wet Contact
Sink/Source (NPN/PNP)	Sink/Source
Wet Contact, ON Voltage Level	+1 VDC Max.
Wet Contact, OFF Voltage Level	+4 ~ 30 VDC
Max. Counts	65535 (16-bit)
Frequency	100 Hz
Min. Pulse Width	5 ms
Input Impedance	3 kΩ
Overvoltage Protection	±35 VDC

Relay Output
Channels	5 (Form A)
Type	Power Relay
Contact Material	Gold-plated Silver Cadmium Alloy
Contact Rating	Form A: 5 A @ 250 VAC 5 A @ 30 VDC
Operate Time	6 ms
Release Time	3 ms
Electrical Endurance	1 x 10^5 ops.
Mechanical Endurance	2 x 10^7 ops.
Surge Strength	4000 VDC
Power on Value	Yes
Safe Value	Yes

COM Ports
Ports	1 x RS-485
Baud Rate	1200 ~ 115200 bps
Data Format	(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Protocol	DCON

Power
Reverse Polarity Protection	Yes
Input Range	+10 ~ +30 VDC
Consumption	1.8 W

Mechanical
Dimensions (mm)	123 x 72 x 35 (W x L x H)
Installation	DIN-Rail

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-7065D CR

4-ch Isolated DI (Wet, 4~30 VDC) and 5-ch Power Relay Module with LED Display using DCON Protocol (Blue Cover) (RoHS)

Module RS-485 DCON 5 kênh đầu ra Relay + 4 kênh đầu vào số DI ICP DAS I-7065D CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng