Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Màn hình cảm ứng HMI 7 inch tích hợp PLC Kinco MK070E-27DRT (12*DI, 12*relay, 3*RTD, 2*RS485)
The MK series products are high-performance offerings from Kinco, integrating the three advantageous technologies of HMI, PLC, and IoT.
The MK series products are jointly developed on a new MCU platform, integrating the Dtools software, the KincoBuilder software and the M-IoT technology platform. They offer rich remote operation features such as remote upload/download program, remote
transparent PLC communication, VNC monitoring, and device management, providing greater value to a broad range of users.
Tính năng
Display Section(HMI)
Logic Control Section(PLC):
Thông số kỹ thuật
| Model | MK070E-27DRT | MK043E-20DTC | MK043E-27DT |
| Rated power supply | DC24V | DC24V | DC24V |
| Voltage Range | 20.4~28.2VDC | 20.4~28.2VDC | 20.4~28.2VDC |
| Maximum Power | ~10W | ~8W | ~8W |
| PLC Section | |||
| Built-in DI/DO |
DI 12*DC24V (NPN/PNP) DO 12*Relay |
DI 9*DC24V (NPN/PNP) DO 9*DC24V(PNP) |
DI 10*DC24V (NPN/PNP) DIO 4*DC24V DO 10*DC24V (PNP) |
| Built-in AI/AO | 3*RD Support Pt100 type, measuring temperature in the range of -40℃ to 240℃ |
2*TC Support J/K/E/T types |
2*AI, 1*AO support 4-20mA/1-5V/0-20mA/0-10V |
| Expansion | support up to 8 KS modules | ||
| Program Download | USB SLAVE(USB-B) /RS485 (PORT1) | USB SLAVE(USB-B) /RS485 (PORT1) | USB SLAVE(USB-C) /RS485 (PORT1) |
| CAN | 1 channel Free communication |
1 channel Free communication |
1 channel Kinco motion control |
| *The Kinco motion control function and CANopen master function cannot be used simultaneously with the expansion function | |||
| Serial Port | 2*RS485(PORT1/PORT1), support communication rates up to 115.2kbps PORT 1:programming protocol, Modbus RTU master/slave、free communication PORT 2: Modbus RTU master/slave、free communication |
||
| High-speed Inputs | 4 channels, support single-phase, dual-phase UP/DOWN, and AB phase mode, support a maximum frequency of 50kHz | ||
| High-speed Outputs | 4 channels | 4 channels | 4 channels |
| Q0.0, Q0.1, Q0.4 :Support a maximum frequency of 50kHz (the load resistance should not exceed 3kΩ when used at the highest frequency). Q0.5 : Support a maximum frequency of 10kHz. |
|||
| Interrupts | 4(I0.0-I0.3), supporting both rising and falling edge interrupts | ||
| Program Capacity | 4k instructions | ||
| Data Capacity | M Area:1k bytes V Area:4k bytes | ||
| Data Backup | E2PROM,448 bytes | ||
| Data Retention |
V Area:VB0-VB1907, 1908 bytes C Area:C0-C63 Lithium battery ,Battery lifetime: 3years typical, at 25°C |
||
| RTC | Built-in real-time clock, with an error of less than minutes per month at 25℃ | ||
| Configuration Software | KincoBuilder | ||
| HMI Section | |||
| LCD Size | 7” TFT | 4.3” TFT | 4.3” TFT |
| Resolution | 800*480 | 480*272 | 480*272 |
| Color Depth | 256K | 256K | 256K |
| Brightness | 250cd/m2 | 400cd/m2 | 400cd/m2 |
| Backlight | LED | ||
| Touch Screen | 4-Wire Precision resistive network (Surface Hardness 4H) | 4-Wire Precision resistive network (Surface Hardness 4H) | 4-Wire Precision resistive network (Surface Hardness 4H) |
| LCE Lifespan | 50000h | ||
| CPU | 700MHz RISC | 700MHz RISC | 700MHz RISC |
| Serial Port | None | None | *RS232(COM2) |
| Ethernet | 10M/100M Adaptive | ||
| Memory | 128MB Flash + 64MB DDR2 | 128MB Flash + 64MB DDR2 | 128MB Flash + 64MB DDR2 |
| Recipe Memory | 256K + RTC | ||
| Expansion Menory | USB HOST(USB-A) | USB HOST(USB-A) | USB HOST(USB-A) |
| Program Download | USB SLAVE(USB-B)/Ethernet/ USB HOST(USB-A) | USB SLAVE(USB-B)/Ethernet/ USB HOST(USB-A) | USB SLAVE(USB-C)/Ethernet/ USB HOST(USB-A) |
| Printing Port | USB SLAVE(USB-B) | USB SLAVE(USB-B) | USB SLAVE(USB-C) |
| Configuration Software | DTools + EdgeAccess + MIoT | ||
| Outer Dimensions | 204*150*33.9mm | 132*102*31.5mm | 132*102*45.42mm |
| Installation Dimensions | 192*138mm | 119*93mm | 119*93mm |
Thông tin đặt hàng
Powered by 24DCV, 1*USB SLAVE (USB-B, shared by PLC and HMI), supporting programming protocols;
PLC Section: DI 12*DCV(NPN/PNP), DO 12*relay, AI 2*RD(support Pt100 type, measuring temperature in the range of -40℃ to 240℃), 2*RS485, 1*Expansion interface (support up to 8KS modules);
HMI Section: 7” TFT, 1*USB HOST(USB-A), 1*Ethernet, supports M-IoT functionality
Tài liệu