Card ISA 16 kênh đầu vào số DI + 16 kênh đầu ra Relay ICP DAS P8R8DIO CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

ISA Bus, 8-ch Isolated DI & Relay Output Board

THÔNG TIN SẢN PHẨM

Features

Relay output Channel
Optically isolated digital input channels
AC/DC signal input ; AC signal input with filter
Connector pin assignment is compatible to 725 series
Power Requirements : 200 mA @ +5 V (max.) ; 260 mA @ +12 V (max.)
LED indicator for each relay output state

Introduction

The P8R8 DIO is an 8 isolated input and 8 relay output interface board designed for control and sensing applications. This interface board is easily installed in any PC/AT/XT or compatible computer. The P8R8 DIO Provides 8 electromechanical relay outputs and 8 optically isolated inputs. The P8R8 DIO can be used in various applications including load switching, external switching, contact closure, etc.

Specification

Hardware
Connector	Female DB37 x 1

Digital Input
Channels	8
Type	Photocoupler (Sink or Source)
Response Speed	Without Filter: 45 kHz (Typical) With Filter: 0.05 kHz(Typical)
Trigger Mode	Static Update
Wet Contact, ON Voltage Level	AC/DC 5 ~ 24 V (AC 50 ~ 1 kHz)
Wet Contact, OFF Voltage Level	AC/DC 0 ~ 1 V
Isolation	5000 Vrms

Relay Output
Channels	8
Type	4 SPDT, 4 SPST
Contact Rating	AC/DC:120 V@0.3 A DC: 24 V@1 A
Operate Time	5 ms (typical)
Release Time	5 ms (typical)
Electrical Endurance	100,000 ops.
Mechanical Endurance	100,000 ops.

PC Bus
Type	ISA
Data Bus	8-bit

Power
Consumption	160 mA @ +5 V 150 mA @ +12 V

Mechanical
Dimensions (mm)	150 x 97 x 22 (W x L x D)

Environmental
Operating Temperature	0 ~ +60°C
Storage Temperature	-20 ~ +70°C
Humidity	5 ~ 85% RH, Non-condensing

Download

Data sheet

D ocuments

Odering information

P8R8DIO CR

ISA Bus, 8-ch Isolated D/I and Relay Output (RoHS)
Includes one CA-4002 D-Sub connector

Card ISA 16 kênh đầu vào số DI + 16 kênh đầu ra Relay ICP DAS P8R8DIO CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng