Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đModule Profibus Slave 1 khe cắm module I/O ICP DAS PROFI-8155-G CR
Features
• Protocol & Hierarchy : DP-V0 & DP-V1 (Read/Write) Slave
• Supports Transmission Rate (Kbps) : 9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
• Transmission Rate Setting : detected automatically
• Address Setting : 0~126 set by Rotary switches, SSA-telegram set by DP-Master(Class 2 only)
• Indicators : PWR, ERR, and RUN LEDs
• I/O modules Configuration : Configured by GSD file
• Supports I/O modules hot-swap : I-87K High Profile series
• Network Isolation Protection : High Speed iCoupler
• DC Isolation Protection : 3000VDC on PROFIBUS side
• 4KV ESD Protection : Contact for each terminal
Introduction
The PROFI-8155 Remote I/O Unit is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 1 slots for ICPDAS I-8k series, I-87k Low Profile series, and I-87k High Profiles series I/O modules. In addition, we also provide hot-swap function for I-87k High Profiles series I/O modules. To setup network, users can choose and configure I/O modules by using the GSD file without any other setting tools.
Specifications
| CPU Module | |
|---|---|
| CPU | 80186, 80 MHz or compatible |
| EEPROM | 2 KB |
| Flash | 512 KB |
| SRAM | 512 KB |
| Watchdog Timer | Watchdog IC CPU built-in |
| LED Indicators | |
|---|---|
| Status | PWR LED, RUN LED, ERR LED |
| I/O Expansion | |
|---|---|
| Slots | 1 |
| COM Ports | |
|---|---|
| Ports | RS-232 on board (For updating firmware)Note 1. |
| PROFIBUS | |
|---|---|
| Controller | Profichil VPC3+C |
| Transceiver | ADI ADM2486 |
| Baud Rate | 9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic |
| Protocol | DP-V0 DP-V1 |
| Power | |
|---|---|
| Consumption | 3 W |
| Mechanical | |
|---|---|
| Dimensions (mm) | 95 x 91 x 132 (W x L x H) |
| Installation | DIN-Rail |
| Environmental | |
|---|---|
| Operating Temperature | -25 ~ +75℃ |
| Storage Temperature | -40 ~ +80 ℃ |
| Humidity | 5 ~ 95% RH, Non-condensing |
Download
Ordering information
| PROFI-8155-G CR | PROFIBUS Remote I/O Unit with 1 I/O Slot (RoHS) |
