Module EtherNet/IP đầu vào tương tự 8 kênh DIFF / 16 kênh SE ICP DAS EIP-2017 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

EtherNet/IP Module (Isolated 8-ch DIFF / 16-ch SE Analog Input)

THÔNG TIN SẢN PHẨM

Tính năng

Transfer protocol: EtherNet/IP
Powerful 32-bit MCU handles efficient network traffic
Support ARP,TCP, UDP, ICMP, DHCP, BOOTP and TFTP protocols
Easy firmware update via Ethernet
Removable terminal block connector
Analog Input
- Differential: 8 Channels
- Single ended: 16 Channels
Internal resistors (125Ω) selectable in Differential mode

Giới thiệu

The EIP-2000 is an industrial remote I/O module series supporting the EtherNet/IP protocol. Users can seamlessly integrate these modules into the Ethernet network from the industrial floor to the enterprise. The EIP-2000 allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. All the modules can be deployed in the network topologies such as star, line or ring. The isolation design protects the EIP-2000 against the harmful interference. The EIP-2017 is an 8-ch Differential and 16-ch Single-Ended AI module. The module provides a jumper to switch Differential and Single-Ended mode. It supports voltage and current input type. The accuracy of the measurement is smaller than 0.1% FSR. The Module is designed as an EtherNet/IP adapter. Users can obtain the input status as well as the connection status of the EIP-2017 by the LEDs indication. In addition, ICPDAS provides software utility to easily configure and test the EIP-2000 modules via Ethernet.

Thông số kỹ thuật

Analog Input
Channels	8-ch differential or 16-ch single-ended ( Jump selectable)
Type	Voltage : ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V Current : 0 ~ +20 mA, +4 ~ +20 mA, ±20 mA (Jumper Selectable in DIFF mode. An external resistor is required in SE mode)
Resolution	16 bits
Accuracy	+/-0.1%
Sampling Rate	10 samples/ second
Input Impedance	Voltage Input: >400 kΩ, Current Input: 125 Ω
Overvoltage Protection	240 Vrms
Individual Channel Configuration	Yes
Zero Drift	+/-20uV/°C
Span Drift	+/-25ppm/°C
Intra-module Isolation	3000 VDC

Ethernet
Ports	10/100 Base-TX, 8-pin RJ-45 x 2 Support daisy chain connection.
Protocol	Ethernet/IP (Adapter)

Power
Consumption	3.8W

Mechanical
Dimensions (mm)	110 x 90 x 33 (H x W x D)
Installation	DIN-Rail

Environment
Operating Temperature	-25 ~ +75 ℃
Storage Temperature	-30 ~ +80 ℃

Download

Data sheet

Documents

Thông tin mua hàng

EIP-2017 CR

EtherNet/IP Module (Isolated 8-ch DIFF / 16-ch SE Analog Input) (RoHS)

Module EtherNet/IP đầu vào tương tự 8 kênh DIFF / 16 kênh SE ICP DAS EIP-2017 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng