F7114: GPS+GPRS IP MODEM kết nối RS-232/485 + 2AI + 1DI +2DO
Features
● Support GPS
● Provide GPRS Point-to-Point solution, eliminating the inconvenient of wiring and low cost of installation.
● It allows to be connected to your remote RS232 serial equipments.
● Support network auto-connecting, it can automatically restore the connection to ensure user data integrity under any condition.
● With simple configuration makes user instantly configure without extra programming needed.
● An embedded Watchdog circuit is provided to avoid equipment shutting down.
● An embedded powerful TCP/IP protocol stack.
● Customized products are available to meet with customer’s special demands.
 |
|
Low Consumption Design |
|
Support multi-sleep and trigger modes to save power consumption |
|
| |
| |
| Supply 5 I/O |
| Compatible 2 pulse wave output channels,2 analog inputs and one pulse input counter |
|
 |
| |
 |
|
Multiple Online/Offline Trigger Modes |
|
Support several online trigger ways,including SMS,ring and data,support link disconnection when timeout |
|
| |
|
Suppot SMS Backup |
|
Modem will switch to SMS state to send the data by SMS when GPRS/3G Internet is down or data center is off. Modem can switch back to communication state from SMS state when GPRS/3G Internet or data center recovers.。 |
|
 |
| |
 |
|
Support Real-time on/off Line |
|
The power consumption is less than 1mA in scheduled power off mode |
|
| |
|
Support APN/ VPDN network |
|
Improve the security of data transmission. |
|
 |
 |
| Provide management software for remote management |
|
Convenient configuration and maintenance interface |
|
Specification
Cellular Specification
| Item |
Content |
| Cellular Module |
Industrial cellular module |
| Standard and Band |
EGSM900/GSM1800MHz, GSM850/900/1800/1900MHz(optional)
Compliant to GSM phase 2/2+
GPRS class 10, class 12(optional) |
| Bandwidth |
85.6Kbps |
| TX power |
GSM850/900: <33dBm
GSM1800/1900: <30dBm |
| RX sensitivity |
<-107dBm |
GPS Specification
| Item |
Content |
| GPS Module |
Industrial GPS Module |
| Receiver Type |
50 Channels
GPS L1（1575.42MHz）C/A Code
SBAS:WAAS，EGNOS，MSAS，GAGAN
Compatible: GALILEO |
| Maximum Navigation Update Rate |
4 Hz |
| Horizontal position accuracy |
Autonomous：2.5m CPE
SBAS：2.0m CPE |
| Time-To-First -Fix |
Cold Start(Autonomous)：29S
Warm Start(Autonomous)：29S
Aided Starts：<1S
Hot Starts(Autonomous)：<1S |
| Sensitivity |
Tracking & Navigation：-160dBm
Reacquisition：-160dBm
Cold Start(Autonomous)：-144dBm |
| Timing Accuracy |
RMS：30ns
99%：<60ns
Granularity：21ns |
| Time Pulse Frequency |
Configurable 0.25Hz to 1000Hz |
Hardware System
| Item |
Content |
| CPU |
Industrial 32 bits CPU |
| FLASH |
512KB (Extendable) |
| SRAM |
256KB(Extendable) |
Interface Type
| Item |
Content |
| Serial |
1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Baud rate: 110~230400 bps |
| Indicator |
"Power", "ACT", "Online", "GPS" |
| Antenna |
Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional)
GPS: Standard SMA female interface, 50 ohm, lighting protection(optional) |
| SIM/UIM |
Standard 3V/1.8V user card interface, 15KV ESD protection |
| Power |
Terminal block interface, reverse-voltage and overvoltage protection |
|
Power Input
| Item |
Content |
| Standard Power |
DC 12V/0.5A |
| Power Range |
DC 5~35V |
Power Consumption
| Working States |
Power Consumption |
| Communication |
50-85mA@12VDC；115-160mA@5VDC |
| Standby |
25mA@12VDC；45mA@5VDC |
| Sleep |
8mA@12VDC；18mA@5VDC |
| Timing Power Off |
0.6mA@12VDC；1mA@5VDC |
Physical Characteristics
| Item |
Content |
| Housing |
Iron, providing IP30 protection |
| Dimensions |
91x58.5x22 mm |
| Weight |
210g |
Environmental Limits
| Item |
Content |
| Operating Temperature |
-25~+65ºC (-13~+149℉) |
| Extended Operating Temperature |
-30~+75ºC (-22~+167℉) |
| Storage Temperature |
-40~+85ºC (-40~+185℉) |
| Operating Humidity |
95% ( unfreezing) |
Download
Specification
Use Manual
Software
