Máy khách không dây công nghiệp 3Onedata IAP2300C-2A22-1T
IAP2300C-2A22-1T-1D-P12_36 is a 100M industrial wireless client. This product provides 1 100M LAN port, 1 3IN1 serial port, 2 IO ports (reserved) and 2 2.4G antenna interfaces. It also adopts rail or wall mounting, which can meet the requirements of different application scenes.
The network management system supports dual link working mode and IEEE802.11b/g/n wireless technology. The maximum rate of the whole machine can reach 150Mbps, which meets the demand of fast data transmission. Each serial port supports 4 TCP or UDP session connections, supporting RealCom, TCP Server, TCP Client, UDP Server, UDP Client and other working modes; The device supports single link fast roaming and double link seamless roaming. In a wireless local area network composed of multiple APs, seamless roaming can be realized without AP switching operation.
The RESET button can realize WLAN debugging and one-key factory default restoration. The hardware adopts fanless, low power consumption, wide temperature, wide pressure design, through strict testing in line with industry standards, can adapt to the harsh requirements of the industrial site environment, can be widely used in the robot industry: sorting robot, small freight robot, etc.
Tính năng
- Support dual link working mode
- Support 802.11r-based single-link fast roaming and dual-link seamless roaming technology
- Support 300bps-115200bps line speed and non-blocking communication
- Support a variety of serial working modes : RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast and other operating modes
- -40~75℃ large range operating temperature
- Strong anti-interference ability and high defensiveness, which can adapt to all kinds of severe environments easily
Thông số kỹ thuật
| Standard & Protocol |
IEEE 802.3 for 10Base-T
IEEE802.3u for 100Base-TX
IEEE802.11a/b/g/n for WLAN
IEEE802.11i for wireless security
IEEE802.11r for fast roaming
IEEE802.11e for WWM |
| Working Mode |
Dual-link mode
|
| Radio Frequency |
802.11B/g/n: 2.412GHz~2.4835GHz
RF power output: 20dBm
Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM |
| Receiving Sensitivity |
802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7
802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7
802.11g: -91dBm@6Mbps, -72dBm@54Mbps
802.11b: -93dBm@1Mbps, -87dBm@11Mbps |
| Transmitting Power |
802.11n_HT40: 20dBm@MCS0, 20dBm@MCS7
802.11n_HT20: 20dBm@MCS0, 20dBm@MCS7
802.11g: 20dBm@6Mbps, 20dBm@54Mbps
802.11b: 20dBm@1Mbps, 20dBm@11Mbps |
| Interface |
LAN port: 1 10/100Base-T(X) RJ45 port
1 3IN1 serial port +2 IO ports (reserved) : 2*5 pin terminal blocks
Console port: CLI command management port(RS-232), RJ45
Antenna: 2 RP-SMA-K type (Female) interfaces |
| Power supply |
12~36VDC, Support anti - reverse connection, 3-pin 5.08mm pitch terminal blocks |
| Power consumption |
No-load: 2.9W@24VDC
Full-load: 4.2W@24VDC |
| Indicator |
Device running status indicator, power connection status indicator, COM indicator, IO indicator, LAN port connection indicator, signal strength indicator |
| Working environment |
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%～95%(no condensation) |
| Physical Characteristic |
Housing: IP40 protection, metal
Installation: DIN-Rail or wall mounting
Dimensions (W x H x D): 35mm×110mm×85mm
Weight: 320g |
| Industrial Standard |
IEC 61000-4-2 (ESD, electronic static discharge), Level 3
Air discharge:± 8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
Power supply: ±2kV
Signal: ±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 |
| Certification |
CE, FCC, RoHS |
Thông tin đặt hàng
300Mbps Dual Brand Wireless Client, 2.4G+2.4G, 1 Port 100M RJ45, 1*3IN1 Serial Port, 12-36VDC, Din-Rail Or Wall Mounting, seamless roaming
Tài liệu
Datasheet
