Card PCI 32 kênh đầu vào số DI + 32 kênh đầu ra số DO ICP DAS PISO-730U CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Universal PCI, 32-ch Isolated Digital I/O and 32-ch TTL Digital I/O Board (Current Sinking, NPN)

THÔNG TIN SẢN PHẨM

Features

Support the +3.3/+5 V PCI bus
16-channel Optically-isolated Digital Input
16-channel Optically-isolated Digital Output (Sink, NPN)
16-channel 5 V/TTL Digital Output
16-channel 5 V/TTL Digital Input
3750 Vrms photo-isolation protection
Built-in DC/DC converter with 3000 VDC isolated
Two interrupt sources
Card ID Function(SMD Switch)
Digital Output status readback
SMD, short card, power saving
Supports Plug & Play to obtain I/O resources
No more manually setting of I/O address and IRQ

Introduction

The PISO-730U universal PCI card supports 3.3 V/5 V PCI bus. PISO-730U cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a Darlington (NPN) transistor and integrated suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.

PISO-730U cards also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Accessories

Specification

Hardware
Card ID	Yes (4-bit)
Connector	Female DB37 x 1 20-pin box header x 2

Digital Input
Channels	16 (Isolated) + 16 (Non-isolated )
Type	Isolated: Photocoupler (Sink and Source) Non-isolated: 5V/TTL
TTL Input, ON Voltage Level	2.0 V Min.
TTL Input, OFF Voltage Level	0.8 V Max.
Response Speed	4 kHz (Typical) (Isolated) 1.0 MHz (Typical) (Non-isolate)
Trigger Mode	Static Update
Wet Contact, ON Voltage Level	9 ~ 24 V (Min. 7 V; Max. 30 V)
Wet Contact, OFF Voltage Level	0 ~ 1 V
Isolation	3750 Vrms (Isolated)

Digital Output
Channels	16 (Isolated) + 16 (Non-isolated )
Type	Isolated: Sink (NPN), Open Collector Non-isolated: 5V/TTL
Operation Mode	Static Update
Voltage	Non-isolated: Logic 0: 0.4 V max. Logic 1: 2.4 V min.
Max. Load Current	+30 V for each channel @ 100% duty (Isolated) Sink: 2.4 mA @ 0.8 V (Non-isolated) Source: 0.8 mA @ 2.0 V (Non-isolated)
Response Speed	4 kHz (Typical) (Isolated) 1.0 MHz (Typical) (Non-isolate)
Isolation	3750 Vrms (Isolated)

PC Bus
Type	3.3 V/5 V Universal PCI, 32-bit, 33 MHz
Data Bus	8-bit

Power
Consumption	600 mA @ +5 V

Mechanical
Dimensions (mm)	105 x 180 x 22 (W x L x D)

Environmental
Operating Temperature	0 ~ +60°C
Storage Temperature	-20 ~ +70°C
Humidity	5 ~ 85% RH, Non-condensing

Download

Data sheet

D ocuments

Odering information

PISO-730U CR

Universal PCI, 32-ch Isolated Digital I/O and 32-ch Digital I/O Board (Current Sinking, NPN) (RoHS)
Includes one CA-4002 D-Sub connector

Card PCI 32 kênh đầu vào số DI + 32 kênh đầu ra số DO ICP DAS PISO-730U CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng